Solved: Re: how to take ssh of cloud managed AP - Page 3

Anonymous · ‎07-03-2020

i want to check the AP is getting internet or not.

how can I log in (SSH or HTTPS) to ruckus cloud-managed AP so that I can log in to AP and ping or traceroute the Internet from AP .

vasanth_edward · ‎01-09-2024

For now, Cloud managed APs are not accessible via SSH/HTTPS; however, in future if there are any possibilities, the communication will be cascaded/notified to the Cloud tenants.

Hope this clarifies your query.

Regards,

Vasanth Edward

View solution in original post

donald_curry_58 · ‎03-29-2024

I’d like to see the power mode on an R770 that is cloud managed and set it to bt5 via ssh. If that could be made available via cloud gui there will be no need. I have one that is being allocated 90W by the switch but is flashing green LED.

vasanth_edward · ‎04-01-2024

Hi @donald_curry_58

As communicated within the thread, the current availability of this functionality is limited.

Kindly initiate a case with us to receive additional assistance. Please refer to the article below for further guidance https://support.ruckuswireless.com/000008651.

Did I answer your query? If yes, hit the Kudos button and also accept the answer as Accepted solution.

Regards,

Vasanth Edward || Snr TSE

RUCKUS CommScope