Solved: RUCKUS Forums - How can i enable SNMP for the APs in the Cloudcont...

Anonymous · ‎12-12-2016

I have to enable SNMP for the APs in our Cloud Controller, but i cant find the Setting for this. Ping is working, but SNMP request not, so i think its disabled. Since the Firmware 200.1.9.12.62 MR SNMP is supported for Unleashed APs, so it should work.

Someone who can help me?

Regards Dennis

vasanth_edward · ‎10-03-2023

Hi @Anonymous, @jamesrucker,

Thank you for writing to RUCKUS Support via FORUM.

SNMP can be enabled from RUCKUS ONE now. However, APs support SNMPv2 and SNMPv3 in read-only operation.

Please refer User Guide https://support.ruckuswireless.com/documents/4481-ruckus-one-online-help-user-guide page 549 & 551 to configure SNMP agent profile & page 210 for enabling in individual AP.

MIB files can be download from https://support.ruckuswireless.com/software/3303-smartzone-6-1-0-0-935-ga-snmp-mibs-for-access-point...

For SNMP OID refer SNMP reference guide, can be downloaded from https://support.ruckuswireless.com/documents/4373-smartzone-6-1-1-lt-ga-snmp-reference-guide-sz100-v...

Do let us know should you have any further queries.

Regards,

Vasanth Edward

View solution in original post

dan_lamay · ‎12-12-2016

Dennis,

You will want to upgrade to 200.2 and download the SNMP Guide from our Support site to get SNMP traps up and running.

Anonymous · ‎12-12-2016

Hi Dan,

thank you for your replay, but I thought the APs upgrade automatically when they connect to the Cloud? How i can upgrade them manually? Where can i configure that it is allowed to manage them from other subnets?

dan_lamay · ‎12-12-2016

Yes just click on the upgrade button and if you have Internet access it will upgrade to the newer release.

Anonymous · ‎12-12-2016

The APs have the Firmware 3.4.0.1.1390. Where i can get the SNMP Guide for the Ruckus Cloud? Can you post a link?

How can i enable SNMP for the APs in the Cloudcontroller?