Showing results for 
Search instead for 
Did you mean: 

How can i enable SNMP for the APs in the Cloudcontroller?

New Contributor II
I have to enable SNMP for the APs in our Cloud Controller, but i cant find the Setting for this. Ping is working, but SNMP request not, so i think its disabled. Since the Firmware MR SNMP is supported for Unleashed APs, so it should work.

Someone who can help me?

Regards Dennis

Hi @renzo_carpio@jamesrucker,

Thank you for writing to RUCKUS Support via FORUM.


SNMP can be enabled from RUCKUS ONE now. However, APs support SNMPv2 and SNMPv3 in read-only operation.

Please refer User Guide page 549 & 551 to configure SNMP agent profile & page 210 for enabling in individual AP.

MIB files can be download from

For SNMP OID refer SNMP reference guide, can be downloaded from

Do let us know should you have any further queries.


Vasanth Edward

View solution in original post


New Contributor III

You will want to upgrade to 200.2 and download the SNMP Guide from our Support site to get SNMP traps up and running.

New Contributor II
Hi Dan,

thank you for your replay, but I thought the APs upgrade automatically when they connect to the Cloud? How i can upgrade them manually? Where can i configure that it is allowed to manage them from other subnets?

New Contributor III
Yes just click on the upgrade button and if you have Internet access it will upgrade to the newer release.

New Contributor II
The APs have the Firmware Where i can get the SNMP Guide for the Ruckus Cloud? Can you post a link?