cancel
Showing results for 
Search instead for 
Did you mean: 

how to ssh to the ICX switch with my username and password with out entering enable password?

reda_sh
New Contributor II
I can login to my ICX6540 switch with my user account but always it asks for enable password .
I need to disable the enable password so I can access to privilege mode directly
1 ACCEPTED SOLUTION

vincent_felisaz
Contributor
Yes sure. Add this command "aaa authentication login privilege-mode". In this way the device enters the Privileged EXEC mode after a successful login through Telnet or SSH.

Hope this helps

View solution in original post

8 REPLIES 8

vincent_felisaz
Contributor
can you share the running config please?

reda_sh
New Contributor II
aaa authentication login default local                            
enable super-user-password ..... 
username admin password .....

I removed the line "enable super-user-password .....  "
then the enable password is not required anymore .
SSH@LAN-9>en
No password has been assigned yet...
SSH@LAN-9#

is there any way to access directly in privilege mode without writing "enable"




vincent_felisaz
Contributor
Yes sure. Add this command "aaa authentication login privilege-mode". In this way the device enters the Privileged EXEC mode after a successful login through Telnet or SSH.

Hope this helps

reda_sh
New Contributor II
Thanks Vince
worked fine as requested