Uploading Image for Ruckus 7150

[thanh_tien_ton_]

I tried to upload image for ICX7150-C12-POE and it was succesful
But when i show version, I saw information as below

BYT-Ruckus-Spare#show version 
  Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
    UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin
        SW: Version 08.0.61aT211 
      Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225 (mnz10115)
       Compiled on Thu Jan 31 07:08:55 2019


 
Please have a look at the line
"UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
      (24723488 bytes) from Primary SPR08090c.bin"
Something wrong here
Could you give me advice this case please??

Thank you very much

[thanh_tien_ton_]

BYT-Ruckus-Spare>show flash 
Stack unit 1:
  Compressed Pri Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
  Compressed Sec Code size = 24723488, Version:08.0.61aT211 (SPR08090c.bin)
  Compressed Boot-Monitor Image size = 786944, Version:10.1.15T225
  Code Flash Free Space = 1197801472

Version 08.0.61aT211 (SPR08090c.bin) what does it mean???

[simon_pollard · Accepted solution]

Something has gone wrong with the upgrade, I've not seen anything like that before. I would suggest repeating the upgrade to 8.0.90 using the manifest file, reload, and then upgrade to 8.0.90 UFI image.

[millerjose]

When uploading an image for Ruckus, ensure the file meets the platform's specifications for size and format neck joint service Typically, JPEG or PNG formats are preferred. Check that the image resolution is appropriate to avoid quality loss. Use a stable internet connection to prevent interruptions during the upload process, and verify that the image appears correctly once uploaded to ensure it meets your needs.