Hello, I have configured Authentication/Authorization on my Ruckus ICX 7150 swithes via AAA (Tacacs+(Cisco ACS)). Authentication/Authorization works fine via SSH, but as I have discovered console doesn't work anymore. I connect the cable to console port but nothing happend
You would need the following to enable console auth:
ICX(config)#enable aaa console
Are you saying you are getting no console response at all? If that is the case, that would have nothing to do with the configuration. You should get some response on console no matter the configuration.
Ben Beck, RCNA, RCNI, Principal Technical Support Engineer support.ruckuswireless.com/contact-us