cancel
Showing results for 
Search instead for 
Did you mean: 

PUS status changed cause stack member reboot

acmesupport
New Contributor

Dear ALL,

 

I'm troubleshooting the ICX stack switch, i found the active member's PUS status changed, the other stack member will reboot, anyone can correct me?

Support

 

6 REPLIES 6

acmesupport
New Contributor

##### Session : Console

Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details
`@Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details
`@Oct 28 12:37:51 PSU 2 status changed, refer "show chassis" output for more details

 

##### Session : SSH 1

Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Unit 1 loses all neighbors.
Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Active unit 1 deletes u2 but keeps its static config.
Oct 28 12:37:51 Debug: Oct 28 12:37:51 T=41d18h2m45.4: Active unit 1 deletes u3 but keeps its static config.

BenBeck
Moderator
Moderator

I would say just that information is a bit too vague to know for certain. I would advise opening a support case (see my signature) so it can be properly investigated. Please include the following output with your case:

skip

show tech

show chassis

dm stk show hit log

 

Ben Beck, RCNA, RCNI, Principal Technical Support Engineer
support.ruckuswireless.com/contact-us

This is quite urgent, i attached here first

*content removed by moderator*

acmesupport
New Contributor

i had downloaded the log, can you help?

*content removed by moderator*