cancel
Showing results for 
Search instead for 
Did you mean: 

Do P300/7311 Point to Point Bridges Need a Controller?

jeremy_parra_72
New Contributor
I have been tasked with finding a solution to connect two buildings with a point-to-point wireless bridge, and I came across these two devices. My question is, do they operate independent of the ZD, or is one required in the topology? I have found some drawings online that describe the topology for these devices that includes a ZD, but whether or not the ZD is required is unclear. There also is information pointing at the "ZoneFlex" product for managing these, but again, it is unclear from my reading how these devices need to be set up.

Any info is appreciated.
5 REPLIES 5

dionis_taveras
Contributor II

Not required...

Very easy setup process.  Very solid performance.


john_d
Valued Contributor II
Not required, and even not supported for the P300. They're basically like invisible ethernet cords in the sky, and don't need any active management/configuration/administration after initial setup (described in the manual)

hyosang_choi
Valued Contributor
Bridge Aps are only worked Standalone mode.

paul_van_der_cr
Contributor
Standalone mode or via Flexmaster