I have a ZF7372 running 9.8.1.0.101 and trying to find out how to enable band-balancing via its CLI. I am not running the AP with a ZD as it is a stand alone device. I see the CLI for band-balancing but am not sure how to enable or configure it. I have both the 2.4 & 5Ghz radios running the same SSID's and security settings. Below are you readouts when I look at the band-balancing settings.
Can someone tell me how the commands work and/or the correct settings to move dual band clients over to the 5Ghz radio.
rkscli: get band-balancing
Band Balancing:
Under Mesh AP : Off
rkscli: get band-balancing wlan0
Band Balancing:
wlan0: Disable
Rssi Threshold limit: wlan0, 20
Band Bal limit: wifi0, 0
MinStaThreshold limit: AP, 10
Under Mesh AP : Off
rkscli: get band-balancing wlan8
Band Balancing:
wlan8: Disable
Rssi Threshold limit: wlan8, 20
Band Bal limit: wifi1, 0
MinStaThreshold limit: AP, 10
Under Mesh AP : Off
rkscli: set band-balancing
parameter error
Usage: set band-balancing {options}
-- {|all}
-- mesh-ap {enable|disable}