I've been trying to set up new SSIDs with different VLANs but so far haven't had any luck.
My current set up is the following:
Router: Edger Router X
I have created the VLANs (111,112) on my router with its DHCP pools. My router goes to port 1/1/1 on my switch and my two APs go to 1/1/4 and 1/1/6.
This is the setup on the switch...
vlan 1 name DEFAULT-VLAN by port!
vlan 111 name test1 by porttagged ethe 1/1/4 ethe 1/1/6!vlan 112 name test2 by porttagged ethe 1/1/4 to 1/1/6
On the Ruckus management console, I have already created the SSIDs using its corresponding VLAN.
I'm confuse on how the tag/untag process works with Rukus. Any help on pointing me in the right direction will be appreciated.
@Kiran_Raval , I also configured on of the ports for VLAN 112 and I was able to connect with my laptop and get an IP and get to the Internet.