cancel
Showing results for 
Search instead for 
Did you mean: 

Intrusion Detection And Prevention - Stopped Working

jarryd_de_olive
New Contributor
Hi

My Intrusion Detection And Prevention is enabled and used to work fine, but I have noticed for the last 3 weeks now, when I go to check for Rogue devices, all of my blocked ssid's and trusted ssid's are missing, and the panel shows me nothing.

Even if I spoof one of my ssids and then go and check my rogue detection, it shows me nothing is present.

I have rebooted my ZD and I have updated it to the latest firmware, but still have made no difference.

I tried disabling Intrusion Detection And Prevention and then re-enabling it, and that too made no difference.

Could anyone assist me?
2 REPLIES 2

gupta_pallapot1
New Contributor III
Check if Background scanning is enabled on the ZD.

jarryd_de_olive
New Contributor
Yes it is enabled for 2.4GHz and 5GHz every 20 seconds