cancel
Showing results for 
Search instead for 
Did you mean: 

ICX7150 bootrom

tommy_nelson
New Contributor

Newby here

I have a 7150 stack and have a bootrom mismatch.  I tried to update the bootrom using TFTP

copy tftp fla 10.70.11.143 mnz10115.bin bootrom but got the error 

Invalid input -> bootrom

I then uploaded the firmware version sps08090dufi.bin once again and tried to load the proper boot version but I still get the error:

Invalid input -> bootrom

What am I doing wrong?

1 ACCEPTED SOLUTION

hashim_bharooc1
RUCKUS Team Member

Hi Newby,

In the 8090 code we have UFI code that has both the boot monitor and the SW code in one file and you are using that file, in the 8090x code you do not have the boot monitor file.

Hope this clears the confusion.

Thanks

Hashim

View solution in original post

2 REPLIES 2

hashim_bharooc1
RUCKUS Team Member

Hi Newby

Please paste output of :

show flash

show version

Also please tell me what code you re upgrading from:

If we are at 8070x code and below we need to step upgrade first to 8080f non ufi to 8090c  ufi code.

Thanks

Hashim

hashim_bharooc1
RUCKUS Team Member

Hi Newby,

In the 8090 code we have UFI code that has both the boot monitor and the SW code in one file and you are using that file, in the 8090x code you do not have the boot monitor file.

Hope this clears the confusion.

Thanks

Hashim