cancel
Showing results for 
Search instead for 
Did you mean: 

How to disable port http/s connection of Zone Director?

alvinp
New Contributor III
Hi,

Anyone know how to disable port http/s connection of Zone Director? But the access still can be opened using webUI or SSH connection in RDP remote Desktop?

The effort I have already tried is using mgmt_acl.
But when i tried to open my WebUI ZD outside rdp, the http/s port is still open.

PORT     STATE    SERVICE
21/tcp       open     ftp
22/tcp       filtered ssh
23/tcp       filtered telnet
80/tcp       open     http
443/tcp     open     https
1812/tcp   open     radius
9998/tcp   open     distinct32
9999/tcp   open     abyss
MAC Address: 00:22:7F:3D:BD:80 (Ruckus Wireless)

Anyone could give me an enlightenment?

legend:
ZD1000 version 9.3.4.0.21

Thanks
4 REPLIES 4

michael_brado
Esteemed Contributor II
Hi Alvin,

    I'm sorry, but for security reasons, controllers only permit HTTPS or SSH secure access methods.
You can enable/disable HTTP or Telnet in addition to default HTTPS/SSH on standalone APs, but not
our controller products.

alvinp
New Contributor III
Hi michael, 

For this matter, it's already been solved by using ACL in switch port which ZD connected. 

Yes, https is still available but now it can be looked up only from corresponding IP address of my remote machine. 

Thanks.

seanmuir
Contributor III
Anyone know how to disable port http/s connection of Zone Director? But the access still can be opened using webUI or SSH connection in RDP remote Desktop?
Why is this a requirement and what are you trying to achieve?

alvinp
New Contributor III
vulnerability on SSL