cancel
Showing results for 
Search instead for 
Did you mean: 

Full isolation WLAN without VLANs and add WiFi device in the whitelist example printer

claudio_bilotta
New Contributor II
Hi there,

here, I  have ZD1112 with 10 APs with 9.7.2.0 build 9 firmwarefirmware  

is possible to do a FULL isolate of WLAN without VLANs

and set few wireless(not wired) host in the whitelist? 

I tried different combinations and it working only with wired host.

Is there any other solution? or upgade firmware  able to do this?

thanks a lot

2 REPLIES 2

michael_grant_6
Contributor II
Whitelist is for wired clients only. You will have to use VLANs, I believe. 

claudio_bilotta
New Contributor II
It's a bit shame, I think zonedirector should provide this feature(whitelist for wifi host) on the next firmware it will be very useful.