AP500 client isolation whitelist

[samantha_adrich]

We've got AP500 acces points. And we've enabled client isolation based on this tutorial.
(since we couldn't find it in the web interface)

https://support.ruckuswireless.com/answers/000002379

However we'd like to connect a chromecast that should not be isolated.
And i can't seem to find anything in the web interface about client isolation. Nor in the SSH terminal.

Does anyone know how we can make a chromecast work eventough client isolation is enabled?

[samantha_adrich]

If i'd get a ruckus zoneflex unleashed. Could it manage the other three AP's? or do I need to get a really expensive controller / replace all AP's with unleashed's

[neil_neil_67001]

The unleashed AP's have the controller built in, and was designed for precisely your sort of network where the cost of a controller is not justified. You configure a single AP and the rest adopt the config from the first.

There are some great videos on the Ruckus Education Youtube channel that can help you understand it better:

https://www.youtube.com/watch?v=N7WJQD3eR0Q&list=PLySwoo7u9-KIeSds4dBO6l0WyBPvEQVPP

 Where are you based? You should ideally speak with your local Ruckus Partner/reseller who will be able to offer guidance. If your AP's are still covered by warranty or are under support contract, you may have additional options.

Neil

[samantha_adrich]

Thank you very much!

[neil_neil_67001]

You're welcome! Keep us posted on how things develop.

[samantha_adrich]

Ok i just found out they are all "Ruckus ZoneFlex R500 Unleashed".

But i can't find the menu item of this manual
https://docs.ruckuswireless.com/unleashed/200.2/t-ConfigClientIsolationWhitelist.html

I'll do a firmware upgrade first. 😉