04-18-2020 06:37 AM
0001:19:34:31.60 LLDP mlldpCtrl: lldp refresh pkt sent out port : A7The area of concern is "PdReq=130" which seems to indicate that the Ruckus APs are initially requesting 130W of PoE power for each AP. A second set of LLDP refresh packets sent to the switch a few moments later contains a more reasonable value, which the switch then delivers and powers the AP without a problem until the pattern repeats.
0001:19:34:31.60 LLDP mlldpCtrl: lldp refresh pkt sent out port : A8
0001:19:34:33.60 LLDP mlldpCtrl: lldp refresh pkt sent out port : A2
0001:19:34:38.14 LLDP mlldpCtrl: device status changed : 11
0001:19:34:38.14 LLDP mlldpCtrl: 8023at: PoeMgr PowerUpdate to LLDP (mtype = LOC_SYS_CHG) on port A8
0001:19:34:38.14 LLDP mlldpCtrl: 8023at: PowerUpdate values PseAloc=24,PdReq=130 (Type=2, Source=1, Priority=3) on port A8
0001:19:34:38.14 LLDP mlldpCtrl: device status changed : 11
04-20-2020 05:31 AM