We have this Zoneflex R510 that we would like to release it from the zone director (that die last week) and reset to factory reset
trying this guide here didnt help/work greeting the old controller config
please your help
Hi @mikime You can either do the factory reset on the AP to lose the controller IP and config or use the below command on the AP to delete the controller IPset director ip del
The controller not power up
trying this FActory reset guide here: https://support.ruckuswireless.com/articles/000010931#:~:text=Locate%20the%20Reset%20pin%20hole,at%2....
also with 10,12,20 seconds reset didnt helped,
the AP loading with the previous config
Any update please?