two mac addresses for each Ruckus AP on the LAN interface

[ziv_l]

Why do I see  2 mac addresses for each Ruckus AP on switch ports ?
I expect only 1 mac address for each AP on the LAN interface.
ie:
VLAN 102      AP MAC e0:10:7f:08:e0:f0      switch port gi7      dynamic
VLAN 102      AP MAC e0:10:7f:08:e0:f3      switch port gi7      dynamic

Please advise.
Ziv

[max_o_driscoll]

Possibly related  to Ruckus APs having 2 or even 3 physical LAN ports depending on specific model.


As in pic below...(in ZD GUI)

from configure 
access points
access point groups
edit

My guess is that one of those tick boxes  will remove one of your entries (just make sure there is no cable attached)!

[ziv_l]

Well,
That is correct.
Thanks