cancel
Showing results for 
Search instead for 
Did you mean: 

registration:676 Failed to send Discovery packet! ret:109

robin_sun_v2rt0
New Contributor
I am trying to register APs to the SmartZone 100 controller,but got the following messages in the log.


Nov 14 04:10:32 RuckusAP daemon.err channel-wifi0: unable to set bgscan to 1 on radioNov 14 04:10:33 RuckusAP daemon.info channel-wifi0: set initial channel 5
Nov 14 04:10:34 RuckusAP daemon.warn Eved: wifi0: CHANNEL-CHANGE.indication: Channel (5)
Nov 14 04:10:47 RuckusAP local2.err syslog: Parameter value L2 is invalid for parameter Tunnel-Mode 
Nov 14 04:10:48 RuckusAP daemon.info channel-wifi0: MTBC changed to 480 minutes
Nov 14 04:11:00 RuckusAP daemon.err wsgclient[462]: httpRecv:311 http status is 403
Nov 14 04:11:00 RuckusAP daemon.err wsgclient[462]: crHttpRequestWithAuth:472 ret:109
Nov 14 04:11:00 RuckusAP daemon.err wsgclient[462]: registration:676 Failed to send Discovery packet! ret:109
Nov 14 04:11:19 RuckusAP daemon.info hub_registrar: OCSP: 'Good' via ocsp-check - querying registrar @ ap-registrar.ruckuswireless.com
Nov 14 04:11:21 RuckusAP user.notice hub_registrar: query result - ''



Is there something I missed on AP configuration?
1 REPLY 1

peng_xia
New Contributor
For standalone ap, just go to management menu and disable those smartcell agent etc., and it will stop this error msg.

Image_ images_messages_5f91c43d135b77e2479da4ae_85900d9357265799fcc73809320e419b_RackMultipart2018012088443girb-db7a1889-d319-45d5-8127-0ad5dc2f658d-1953206100.png1516472816
Labels