09-27-2022 08:42 PM
1. how to change the R550 firmware from unleashed to vSZ.
2. how to change the H550 firmware from vSZ to unleashed.
09-27-2022 08:52 PM
Hi @ben_leung
In both the case, you first need to upgrade the APs from controller managed firmware to standalone version 110.x or 114.x.
Upgrade either by doing a factory reset or via CLI.
once done, you can connect the AP to vSZ\Unleashed network by setting the controller ip from GUI or via cli.
09-27-2022 08:58 PM
Hi @ben_leung
Below is the commands if you want to upgrade the APs via CLI using the TFTP.
fw set host <tftp ip address>
fw set control <control file name>
fw set proto <tftp>
fw update