This AP is more than 2 years old, and support has expired from our local partner. so im doing all the troubleshooting on my own.
I just upgraded this 2942 AP a couple of weeks ago to Software Version: 9.6.1.0.15
All office equipment (tablet, phone, laptop) can see the SSID, but upon requesting connection it will display "connecting..." then suddenly stops, then repeat. it does not associate to the network or successfully connect to the SSID.
I have mixed and match all the settings i could think of.
Change wireless mode, look for a clean channel (1,6,11), change country code, reboot, turn-off device for 15 sec. then power on, etc..
i just want to make sure that ive covered all the process of troubleshooting before i tag this AP as defective.
