cancel
Showing results for 
Search instead for 
Did you mean: 

bad firmware header magic

martin_nyokolod
New Contributor II
I am trying to upgrade my T300 outdoor AP with the OutdoorAP-100... firmware but I keep getting the "bad firmware header magic" error message. The AP is currently on Unleashed and does not emit wireless, It was previously used with a controller but I don't have a controller at the moment and would like to use it as standalone
6 REPLIES 6

phil_coverdale_
New Contributor III
Hi Martin,

Please let us know which version of software the AP is currently running an which version you're trying to install.

Thanks.

martin_nyokolod
New Contributor II
Hi there. Thanks for replying.

The AP currently has an unleashed firmware with the following details.


Device Name:

RuckusAP

Device Location:


GPS Coordinates:


MAC Address:

74:3E:2B:2A:73:B0

Serial Number:

941604905934

Software Version:

3.1.2.0.134

Uptime:

2 mins 47 secs

Current Time (GMT):

Sun Jan 15 20:47:37 2017





Trying to upgrade to Standalone AP Software 100.1.0.0.432

@phil. Is it possible to upgrade this AP?

have you tried reflashing the firmware back to standalone via CLI?
https://support.ruckuswireless.com/articles/000001551