Showing results for 
Search instead for 
Did you mean: 

ZD 3000 AP's upgrading loop

New Contributor II
I have A ZoneDirector 3000 with firmware version build 75. when i try to adopt T300 Or R500 Ap's it's stuck in a loop of Upgrading Ap's Firmware.

Can You Please Help me as soon as possible?

RUCKUS Team Member

The AP's upgrade their firmware from the Zone Director using FTP on port 21.

Please verify the version of code presently running on the AP's by connecting to the AP's via CLI/SSH - get version.

If the AP's are running unleashed code (200.x) or SCG code (1.x, 2.x, 3.x, 5,x) then you will need to first flash the AP's with the standalone version of code 10x.x (104.x version of code is the most reliable).

Here are some KBA articles that might help:

How to upgrade standalone AP through FTP or local option 

Upgrading standalone AP through FTP or local option

Standalone AP upgrade via CLI

This article gives you information on how to upgrade the standalone AP via CLI.

I hope this information is helpful.

Thanks for selecting Ruckus Networks products, A Commscope company.

It's work's thanks 

New Contributor II
okay thank you for your time.

New Contributor III
This should solve your problem:

Make sure FTP is enabled on the ZD. Login to the ZD cli using any SSH tool like PuTTy and type the following commands.

ruckus> en    
ruckus# config
ruckus(config)# system

To disable again:
ruckus(config-sys)# no ftp