I have a ZF 7372 that I recently had given to me by a vendor, and wanted to set it up in my lab for practice/learning. I'm having some trouble getting wireless clients isolated on the guest network I set up.
WAN > SonicWALL (DHCP) > L3 Switch > Ruckus
VLAN 1 - Data
VLAN 90 - Private Wireless
VLAN 100 - Guest Wireless
Ruckus: Connected via port 2 as a trunk port with Bridge to WAN
L3 switch ACL: Deny traffic from VLAN 100 to all VLANS, including 100
SonicWALL ACL: Same as above
With this setup, however, I can still ping across hosts on VLAN 100; is there something on the AP that I need to configure?
Thanks,
Overkill
