Unable to perform firmware upgrade on a Standalone AP

[raphael_maunier]

I'm trying to upgrade my 2 standalone 7363 AP and I'm not able to do it

One is running code 9.0.0.0.80 and the other one 8.2.2.0.7.

I don't have the local choice as you can see here : http://img62.imageshack.us/img62/8262...

Of course TFTP, FTP and HTTP when I try them.

I have the latest BL7 code 9.6.1.0.15 . Is there a way to have the right url or the file ?

The ruckuss website seems to not have the file in place anymore :

wget http://fwupdate1.ruckuswireless.com/z...
--2013-10-13 00:38:25-- http://fwupdate1.ruckuswireless.com/z...
Resolving fwupdate1.ruckuswireless.com... 204.42.138.144
Connecting to fwupdate1.ruckuswireless.com|204.42.138.144|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2013-10-13 00:38:26 ERROR 404: Not Found.

Any help are welcome.

[raphael_maunier]

Thanks for this,

I'm not able to test it before next week. I'll update here as soon as I did the test.

Raphael

[matthewenger]

I just tried the HTTP method on a 7962, it says upgrade not necessary, same as ftp. I am running 8.2.2.0.7

[keith_redfield]

If you are using the URL and control files I gave above, then it will fail as they are specific to each AP. Try http://fwupdate1.ruckuswireless.com/z... for yours (http)

[matthewenger]

Thanks, I tried that and it insists on it being a control file. So I tried again http://fwupdate1.ruckuswireless.com/z... and it still failed saying no upgrade necessary.

[keith_redfield]

Hmmm..I'll need to consult with the Ancients....