This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject

 

RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.

You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.

Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.

 

Ruckus Wireless
RUCKUS Self Help |   ASK the Pack
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Unable to Enable ChannelFly on 2.4GHz Radio

Crocodino
New Contributor II

‎04-10-2023 01:14 PM

I've got an R720 running 200.13.6.1.319 (Unleashed) and I am looking to enable Channelfly on my 2.4GHz radio. I enable ChannelFly in the GUI and save, when I refresh the auto channel assignment is completely disabled for the 2.4GHz radio. When I run the 'channelfly radio-2.4-mtbc 100' command in the CLI, the command executes successfully but then when I run a show command the auto channel management for the 2.4GHz radio is disabled entirely. Is this a bug in the firmware or is this expected behavior?

0 Kudos
Reply
1 REPLY 1

sanjay_kumar
Moderator
Moderator

‎04-10-2023 11:46 PM

Hi @Crocodino 
I enabled Channelfly on the GUI and checked the status from the CLI and I can see that the Background is disabled and Channelfly is enabled.

sanjay_kumar_0-1681195549756.png

Can you share some screen shot of what you are getting so that I can cross verify?

 

0 Kudos
Reply
Copyright © 2026 Khoros, LLC