There's any way to limit the number of clients per SSID on each AP?

[nuno_pimentel]

There's any way to limit user of each AP per SSID ?
For example  If i'm deploying several SSID in the same AP i would like to limit the number max of clients in each AP, that should be an interesting feature for example:

i have : 3 SSID like
public wifi open
org wifi: WPA2
media wifi: WPA2

and i would like to limit the the public wifi to use max: 50% of availability of the AP and the other with quotes of 25% each.

Is this possible to configure ?

I know that there are the option of mark an SSID as priority low or high, but how does ZD work in this situation? like in this example if i have all max  clients connected in the public wifi and someone wants to connect "org wifi" or "media wifi" ?

regards

[max_o_driscoll]

Places where you can configure client connections in ZD.

1. Access Point Groups
configure...access points...access point groups



2. WLANs

configure...wlans



Combination of these two settings should give you some control. 

[max_o_driscoll]

There is a %priority setting but that is another issue.
I've just shown where you can configure max client connections.

[nuno_pimentel]

Thanks for the quick answer it will help for sue. But by the way why is another issue? How it work this priority i never understand quite well and in the manual it's not very specific how ti works, or if only works if we force the traffic pass in the ZD.