TUNNELED VSZ-D Data Plane latency high, and speedtest is never over 10mbit

[simon_sj_strand]

We have 3 different SSID:s tunneled through the Data Plane. For some reason latency to the tunneled networks gateway is over 300ms. Speedtest is only 10mbit.... Is there anyway to debug the data plane?

If I remove the tunnel and change the configuration to APBridged, the speedtest shows over 150mbit.

I'm running vSZ-D 5.0.0.0.675

The problem seems to be at the data plane?

[pasquale_monard]

There are many factors that can contribute to performance issues and since I don't know your setup, I suggest opening a tac case. 

[sal_buscemi]

Check under reports>ruckus ap tunnel stats, and see how many dropped packets you have. We had poor tunnel performance on 5.0 and had to downgrade to 3.5 to get it stable. 

[sal_buscemi]

to add - we were using the SZ124, not the vsz-d