T series/ R700 reboot PoE switch will can't boot up

[td_td]

Any person has similar experience?
I am using Cisco switch with T300 series AP and R700 AP with SCG
Recently some of the AP will can't boot up after reboot the PoE switch
Some of them will return to original firmware from ZD
Some of them will return to original firmware from SCG

[michael_brado]

Yes, you can execute these as two different scripts, one for each radio.
Or, you can configure both radios of your APs at once too.

[td_td]

So my script should be like below?

fw_version=3.0.4.0.461
model=all
set blacklist wifi1 52 -1
set blacklist wifi1 56 -1
set blacklist wifi1 60 -1
set blacklist wifi1 64 -1
set blacklist wifi1 100 -1
set blacklist wifi1 104 -1
set blacklist wifi1 108 -1
set blacklist wifi1 112 -1
set blacklist wifi1 116 -1
set blacklist wifi1 120 -1
set blacklist wifi1 124 -1
set blacklist wifi1 128 -1
set blacklist wifi1 132 -1
set blacklist wifi1 136 -1
set blacklist wifi0 2 -1
set blacklist wifi0 3 -1
set blacklist wifi0 4 -1
set blacklist wifi0 5 -1
set blacklist wifi0 7 -1
set blacklist wifi0 8 -1
set blacklist wifi0 9 -1
set blacklist wifi0 10 -1
set blacklist wifi0 12 -1
set blacklist wifi0 13 -1
reboot

[david_black_594]

Good grief. Just do a hard reset, login with super
sp--admin, and reload the Base 104 image. Then you’re back to brand new factory condition.

[nadhik_sadhik]

Enter admin for the user name and password for the password. If you changed your admin password, enter the password that you created. NETGEAR genie displays.
see: https://luckypatcher.pro/
https://kodi.software/
https://plex.software/