Successful L2TP Endpoint

[jason_pearcy]

Any recomend an L2TP server that will work with ruckus 9.7 APs? I have tried a couple and constantly in the logs of the AP I see that there are different protocols being used that the AP rejects.

Unsupported protocol 'Internet Protocol Control Protocol' (0x8021) received

Unsupported protocol 'Compression Control Protocol' (0x80fd) received

[keith_redfield]

Hi Jason,

Our AP's use a proprietary tunnel handshake. You'll only be able to terminate to a ZD. If you need connectivity across a public WAN, you'll need to provide the tunnel.

[jason_pearcy]

Standalone AP managed by flexmaster. I read in a setup guide about using L2tp for management traffic. Not ZD communication.

[keith_redfield]

It's the same deal - you can connect to FlexMaster but not another L2TP device. You can either tunnel as above, or expose the FM server. See https://support.ruckuswireless.com/an...

[jason_pearcy]

I think we are talking about different things at this point. Thanks for the help.