RUCKUS Community Forums are now in READ-ONLY mode while we migrate to a new platform.
You will still be able to read posts and knowledge articles, but will be unable to post new content until Go Live on the new platform Monday August 17.
Lennar Smart Home customers: please contact [email protected] for assistance during the week of August 9-17.
Hello
We have virtual SmartZone, version is 6.1.1.0.959 and I would like to apply per-user shape and not sure how I can do it. In setting I found one place where it should be:
I tried to apply L3 Access Policy but it didn't shape traffic.
How I can apply shape per user?
Hi @irakli_gvishian,
Greetings for the day.
Yes, Currently we do not have the option to limit the user based on the usage limit but WLAN configuration has an option where the uplink/downlink bandwidth can be configured. But this is common for all the users connecting to that WLAN.
SmartZone 6.1.1 (LT-GA) Traffic Management Guide (SZ300-vSZ-H):
SmartZone 6.1.1 (LT-GA) WLAN Management Guide (SZ300-vSZ-H):
We have Up-link/Down-link rate/speed limiting option available and can be achieved in the below 2 ways:-
- SSID Rate Limiting: https://docs.commscope.com/bundle/sz-611-adminguide-sz300vsz/page/GUID-52C7C338-450C-4C3A-A45B-BD96E...
2. UTP (UserTaffic Profile):https://docs.commscope.com/bundle/sz-611-adminguide-sz300vsz/page/GUID-3AA86469-D7D6-40AB-9F48-01DFA...
Limitations When Applying Role Policies to Users:
User traffic profiles are configured with various policies (such as rate limiting), so when a profile is applied to a WLAN, the policies in the profile are applied to all the UEs in the WLAN. The policies can also be applied to a user role in a WLAN, but not all the policies defined in the profile are applied to the role.
Youtube:
https://www.youtube.com/watch?v=OOGN-FvBW4k&t=171s
Similar queries in the Ruckus Forum:
https://community.ruckuswireless.com/t5/ZoneDirector/How-to-limit-download-size-per-user/m-p/45756
If you are looking specifically which can be achieved in the Radius method:
In the RADIUS attributes method, each policy (such a rate-limiting or user traffic profile) has a unique RADIUS attribute. Therefore,
specifying the RADIUS attribute for a policy overrides all other forms of the controller policy. For example, if a UE is already assigned.
Let me know if this helps answer your query.
Regards
Syed
