Currently It have some CLI script apply to the T300 / T301 series AP after script is applied the PoE switch reboot and those AP is not able to boot up.
*Remark: Before apply the CLI script, it has also reboot the PoE switch without problem
So I suspect the CLI script make something wrong on it.
Is there any problem on the below of script?
file a
fw_version=3.0.4.0.461
model=all
set blacklist wifi1 52 -1
set blacklist wifi1 56 -1
set blacklist wifi1 60 -1
set blacklist wifi1 64 -1
set blacklist wifi1 100 -1
set blacklist wifi1 104 -1
set blacklist wifi1 108 -1
set blacklist wifi1 112 -1
set blacklist wifi1 116 -1
set blacklist wifi1 120 -1
set blacklist wifi1 124 -1
set blacklist wifi1 128 -1
set blacklist wifi1 132 -1
set blacklist wifi1 136 -1
file b
fw_version=3.0.4.0.461
model=all
set blacklist wifi0 2 -1
set blacklist wifi0 3 -1
set blacklist wifi0 4 -1
set blacklist wifi0 5 -1
set blacklist wifi0 7 -1
set blacklist wifi0 8 -1
set blacklist wifi0 9 -1
set blacklist wifi0 10 -1
set blacklist wifi0 12 -1
set blacklist wifi0 13 -1
