cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus VSZ Unable to find new R510 AP

jako_nurges
New Contributor II
I am running VSZ version 3.4.0.0.976. I have currently 21 AP. I purchased 5 AP and configured 4 of them without an issue, when setting up the last one it is not showing up in the vSZ.
Everything has been done over the same physical port with no configuration changes. I am able to ping the VSZ from the AP. The AP is running firmware 110.0.0.0.663. Currently i have 1 license free of 21 in the vSZ. I have tried resetting and reconfiguring the AP from CLI over SSH and over the browser. Any ideas what else to try?
I have attached the picture of my VSZ licenseses.Image_ images_messages_5f91c3ee135b77e2478ec0d6_a113051d6f0d6dc249fdc29d74cdce90_RackMultipart201810099889117dp-bf6c36fa-d391-4b9c-806e-7487a2e7d150-284048190.JPG1539088594
18 REPLIES 18

1said_sanoussi
New Contributor III
is the vSZ-E or H deployement. If H deployement you need to take a look at the staging zone. If it's an E deployement you should see the AP's where you need to approve them before they will join

jako_nurges
New Contributor II
Hi,
it is an H enviornment. The thing is the AP does not appear in the list where i should approve it. That is the problem i am having. It seems it is not getting connected to the VSZ-H

1said_sanoussi
New Contributor III
make sure it is connected to the same subnet. just to test it. Otherwise set the ip adres of your vSZ via SSH by typing: set scg ip and reboot the ap. this may force a tunnel to the controller

david_saez
New Contributor III
Hi Jako,

have you tried factory resetting the AP?

Thanks.
David.