Ruckus VSZ Unable to find new R510 AP

[jako_nurges]

I am running VSZ version 3.4.0.0.976. I have currently 21 AP. I purchased 5 AP and configured 4 of them without an issue, when setting up the last one it is not showing up in the vSZ.
Everything has been done over the same physical port with no configuration changes. I am able to ping the VSZ from the AP. The AP is running firmware 110.0.0.0.663. Currently i have 1 license free of 21 in the vSZ. I have tried resetting and reconfiguring the AP from CLI over SSH and over the browser. Any ideas what else to try?
I have attached the picture of my VSZ licenseses.

[david_black_594]

Yes, it's either downgrade the AP to 104 or upgrade the vSZ to 3.6.

[ayoub_chabrouk]

Thanks for the suggested resolution, you saved my day, i uploaded to the AP the firmware "R500_104.0.0.0.1347" after reboot "set scg ip x.x.x.x" and it's back online now,

[victor_batista]

Thank you for sharing I had the same exact problem. VSZ 3.4.1.0.208 however it's not VSZ fault just sharing for reference. It's the APs firmware! After troubleshooting DHCP options, trying to set controller IP manually, and looking at logs I found that SSL error. 

It was the AP 510's firmware version "110.0.0.0.663" which has a bug or something. As I also got the SSL error. This was on SIX 510's with the same exact firmware. Downgrade worked for ALL SIX! So not random 

 "Jan  4 17:45:28 RuckusAP daemon.err wsgclient[716]: curl_https_request:1060 curl_easy_perform failed:[35][SSL connect error]. "

I downgraded from "110.0.0.0.663" to "104.0.0.0.1347" For anyone else experiencing this problem. I can't say for sure if other models have this problem with 110 firmware however the 510 for sure do. As OP and I had 510's. I had SIX 510s doing the same exact thing as shown in the logs.

THANK YOU FOR SHARING!

PS Don't trust Firmware "110.0.0.0.663"

[revolver_bou]

try to reset the app DigitalOcean SiteGround iPage