02-23-2021 07:01 AM
Hello,
I am having trouble to setup an access point that I have here. The AP is the Ruckus T310c.
I have made an reset to factory setting by clicking for more than 4 seconds in the button right next the ethernet port.
I had configured the PC ip address to 192.168.0.5 and the gateway is 192.168.0.1.
Open the web browser and typed 192.168.0.1 and appears the login page.
But i put the default credentials and they do not work.
username: super
password: sp-admin
I am missing something here?
Regards,
David
02-23-2021 07:05 AM
Hi David,
I would recommend you need to press the reset button for 15-20 seconds.
Afterwards; if the login screen still does not accept the default credentials, then try a different web-browser, I sometimes have this issue with Firefox with brand-new out of the box APs.
Hope that helps,
Darrel.
02-23-2021 07:21 AM
I think the issue I was using the Opera Browser.
Now it worked many thanks! 🙂