Ruckus R650 AP

[Windlovr]

Trying to install and activate a Ruckus R650 AP on to my residential network.  Am MAC based here.

Have to R650 connected into a POE Switch.  Powers up and can see the Config file on my network.  When I click on the config file it asks me for a WPA2 password.  Have tried the Ruckus default PW. sp-admin, but no connection.  Have tried to connect direct with usb to my mac and access the default ip 192.168.0.1 but no luck there either.  I am a user not an IT guy so could be something simple that I have no idea how to find.  Please help.  Thanks

[Squozen]

You can’t connect via USB (unless you mean with a USB-to-Ethernet adapter). Reset the AP to factory defaults. 

[sagar_kuber]

Hi,

I hope you have referred Quick Setup Guide: 

https://docs.commscope.com/bundle/R650-QSG-800-72206-001-RevE/resource/R650-QSG-800-72206-001-RevE.p...

Regards,

Sagar Kuber

Sr.Technical Support Engineer

[Windlovr]

Thanks all - ended up. getting access to the set up page thru the IP address.  It is programed and operating well.  Thanks to all that contributed.