cancel
Showing results for 
Search instead for 
Did you mean: 

Ruckus R350 with OpenWRT/Qualcomm Dev Kit

gandi69
New Contributor

Hi I have acquired a Ruckus r350 access point (on the secondhand market) and it seems to have come with a variation of OpenWRT on it (Qualcomm Software Development Kit). How do I revert this to stock Ruckus firmware -  (namely unleashed) I have the ability to access the unit and read the serial console via jtag cable and am looking at trying to try and erase the partitions etc.

1 REPLY 1

yogesh_giriyapp
Moderator
Moderator

Hi, 

You can follow the Ruckus Article mentioned below. This helps to get the AP from Unleashed to Standalone firmware which also erases the configuration from old firmware.

Converting Ruckus Unleashed AP to Standalone AP | Knowledge Base | Ruckus Wireless Support

Regards,

Yogesh G