Ruckus 7982 issues on Cisco 3750PoE Switches

[samuel_acosta_j]

I have a Cisco 3750PoE-48 network at all of my stores. Sometimes a ZF7982 will stop communicating with my ZD3000 causing service outages at that location. I have found only 2 things to fix this particular problem; either move the wap to another port and configure the port or reboot the switch for the wap to come back up. Anyone having this issue?

[michael_brado]

Hello,
   Yes, there have been observations about not all 802.3af switches will adequately power the 7982 model APs.
https://support.ruckuswireless.com/answers/000001623

   The common workaround, if you have enough ports, is just to not connect two APs in adjacent ports, either
side by side or above/below each other, so only 2 APs draw power from a 4 port block of switch ports, often
powered by a single tranceiver each.