I have flashed an R670 with the Standalone Firmware that is available for this AP (122.0.0.0.5114). Went to set it up as a survey AP and found in the GUI there is no option to configure the 6GHz radio. Looking into this, previously with the WiFi6E APs the 6GHz radio had to be configured from within the CLI (v 118.x.x). I have tried these commands in 122.x.x and they don't seem to work, or don't recognize the wifi2 radio. (https://support.ruckuswireless.com/documents/4017)
Has anyone had any luck with this or is it the case that the R670 doesn't yet have standalone firmware that supports the 6GHz radio and config for it?
