R650 unleashed

[JA1]

I run a network of r350 using unleashed. I have an r659 that has been running in an office environment without unleashed and wish to add it to the network 

I have successfully added unleashed firmware to the r350s before but cannot seem to do it with the r650

i do not have a power cable for the 650 . Do I need one to run the configure  set up or is there another way to power the 650 via poe to allow me to update the firmware 

thanks

[Ayush_Tripathi]

Hello @JA1

Please confirm the current firmware version on the R350 Unleashed AP ?

If you want to add the R650 AP to your current Unleashed setup, please upload the same firmware version on the AP and add it to the Unleashed network

Please refer the below KB article-

https://support.ruckuswireless.com/articles/000005720