cancel
Showing results for 
Search instead for 
Did you mean: 

R510 Standalone, Dhcp reservation

fabio_ugolini
New Contributor

Hello, I have an R510 with Standalone firmware R510_106.1.0.0.469
I have set the dhcp server for the LAN local network, but I can't find how to enter the reservations.
For example the client with a given mac gets a determined ip address, etc.
4 REPLIES 4

david_black_594
Contributor III
Maybe I don’t understand your question, but the AP in autonomous mode has nothing to do with dhcp or reservations. Reservations are made on the dhcp server provided that the dhcp service supports it.

fabio_ugolini
New Contributor

david_black_594
Contributor III
I'm probably not the best to answer this because we never use APs in standalone mode. DHCP and NAT appear to be supported but I don''t see any ability to do reservations.  Ruckus controller and AP functionality is very good and better than most competitors, but dhcp functionality has always been mediocre at best.

Ankush_Chandan
Contributor II
Hi Faboi,

We have this option on our Unleash Platform. All you have to do is download the latest 200.7 image from our support site and upgrade your AP to unleash.

https://support.ruckuswireless.com/software/2043-ruckus-unleashed-ap-200-7-10-102-64-ga-refresh1-sof...

Image_ images_messages_5f91c45d135b77e247a47e60_2afea59cb913e5c367342f3e5887c4e2_RackMultipart20190705586831mwq-e7a80f06-30ab-4585-aeb3-8a4e36f07ac4-1145652722.png1562317616


Regards,
-Ankush

Labels