03-27-2023 04:36 AM - edited 03-27-2023 04:38 AM
hey folks
we have some old R510s running firmware version: 200.3.9.13.228
is it OK just to go ahead and 'leapfrog' all the intermediary updates to get to the most recent (200.7.10.202.127), or would we need to do each upgrade sequentially to get to the latest?
Also - are the network and mesh configurations reset/need reconfiguring after firmware upgrades or are settings carried over?
thanks
Thanks
Solved! Go to Solution.
03-28-2023 01:20 AM
Hi @twolfend,
Thank you for reaching out to Ruckus Support.
Leapfrogging would generally reset the existing configuration, have to go through all the intermediatory upgrades to get to the latest & the config will be intact.
Regards,
Vasanth Edward
03-28-2023 01:20 AM
Hi @twolfend,
Thank you for reaching out to Ruckus Support.
Leapfrogging would generally reset the existing configuration, have to go through all the intermediatory upgrades to get to the latest & the config will be intact.
Regards,
Vasanth Edward
01-23-2024 10:41 PM - edited 01-23-2024 10:43 PM
Hello Vasanth,
Same situation as twolfend and 10 months behind him as I have (2) R510 access points and they are running firmware version: 200.3.9.13.228. The latest/newest firmware is 200.7.10.202.145. To make sure I don't screw up my network, I should use the Unleashed Browser UI and choose the Online Upgrade in sequential order starting with 200.4.9.13.47 and continue until I get to the 200.7.10.202.145. Is there anything else I need to worry about?
Thanks,
Shiv
04-02-2023 04:01 PM
Wow, there are 9 versions newer than what I'm running now. Being in a Rukus Lennar Smart home, most residents have no idea about updates for any of the smart home devices. I at least have experience updating PC's and various other kinds of network equipment. One day our home network infrastructure will complete crash due to outdated firmware!
05-22-2023 02:42 AM
Hello @raymond_jender Please share current version of Unleashed APs, would suggest & assist with the upgrade.
Regards,
Vasanth Edward