I am working a yacht that has a Ruckus and a couple of AP scattered through the boat.
We have a r300 in the crew mess and suddenly stopped working, meaning the power light is solid green but the DIR light is blinking slowly. Mind you the cable is quite long (37m) leading towards a room with 3 switch racks. from the rack to the cable, there is a coupler, if i connect the ap directly to the switch, the AP starts fuctioning normally, so i tried replacing the coupler, with no result. Is it possible the cable from the coupler to the crew mess would be an issue? Its pretty impossible to change that cable because of the length and it going through all kinds of panels and rooms, could there be some other solution to this that im missing?