cancel
Showing results for 
Search instead for 
Did you mean: 

Powering H500 via PoE and provide power to connected Phone.

simon_b_hrer_73
New Contributor III
Hi everyone,

I just stumbled to the H500 Wall-Switch-AP. This one can be powered via PoE-Input-Port. Also the H500 has got a PoE-OutputPort for Devices. Is it possible to power the H500 via PoE and also power a connected Device (like a Phone) through the PoE-Output-Port or do I have to power the H500 itself through normal power supply in this case?

Best regards,
Simon
2 REPLIES 2

michael_brado
Esteemed Contributor II
Yes, the H500 (Hotel AP) is designed for additional PoE device (like an IP phone) attachment.
See H500 Power Source and available PoE out details in the Quick Start Guide:
https://support.ruckuswireless.com/documents/724-h500-quick-setup-guide

simon_b_hrer_73
New Contributor III
Good Morning Michael,

thanks a lot for your answer! That was exactly what I was searching.

Best regards,
Simon Bührer
Labels