P300 Communication Status in SCADA

[vaitheeswaran_e]

I am using P300 Root and Non-Root bridges. I need to take the communication status and the signal strength in the SCADA(Wonderware Intouch) without logging in the browser. Please suggest an solution for this!!!!!!!!

[vaitheeswaran_e]

Hi Syamantak,

Is there any User Interface Protocol for Ruckus P300, so that i could access the signal status and strength by calling through the datatypes in my SCADA. 

Thanks and Regards,
Vaitheeswaran Elango.

[syamantakomer]

Hi Vaitheeswaran,

I think you have already asked this on a different forum post and my colleagues Michael Brado already answered it.

https://forums.ruckuswireless.com/ruckuswireless/topics/p300

There is no HMI interface available in P300, all you can do is pull the SNMP data by setting up SNMP server on  your SCADA (if supported) and configure the server details in P300. Rest data processing for graphical representation needs to be done on server side.

Regards,
Syamantak Omer