Showing results for 
Search instead for 
Did you mean: 

P300 Communication Status in SCADA

New Contributor II
I am using P300 Root and Non-Root bridges. I need to take the communication status and the signal strength in the SCADA(Wonderware Intouch) without logging in the browser. Please suggest an solution for this!!!!!!!!

New Contributor II
Hi Syamantak,

Is there any User Interface Protocol for Ruckus P300, so that i could access the signal status and strength by calling through the datatypes in my SCADA. 

Thanks and Regards,
Vaitheeswaran Elango.

Community Admin
Community Admin
Hi Vaitheeswaran,

I think you have already asked this on a different forum post and my colleagues Michael Brado already answered it.

There is no HMI interface available in P300, all you can do is pull the SNMP data by setting up SNMP server on  your SCADA (if supported) and configure the server details in P300. Rest data processing for graphical representation needs to be done on server side.

Syamantak Omer

Syamantak Omer | Sr.Staff TSE | CWNA | CCNA | RASZA | RICXI