Multiple Bands / Multiple SSID

[gary_avalos]

Good afternoon,

I have a zonedirector ZD 1106 version 9.10.2.0 build 11, the APs that are connected are the r500 / r600 / zf7372.

I would like to be able to work with several SSIDs and be able to define which band to work on.

I do not know how to do that.

regards

[mitchell_axtell]

It can be done per AP or per AP group.  AP group show in the attached image.

[gary_avalos]

I do not know how to do it in WLAN Groups, I have seen that this can be changed in Access Point Groups

I would like to have something like that

AP1 -> 2.4GHz -> WLAN1 -> Acces Point Groups 1
AP1 -> 5.8GHz -> WLAN2 -> Acces Point Groups 2

Regards,

[mitchell_axtell]

Apologies, the above is actually in the system default AP group, using two different WLAN groups.  I misspoke on the above.

[gary_avalos]

Thank you,

Ok I can use a WLAN for 2.4GHz and another WLAN for 5.8GHz for the Access Point Group.

But will it be that I can use a WLAN for 2.4GHz and another WLAN with 2.4GHz and 5.8GHz.

regards

[mitchell_axtell]

The way you would do this is make Group1 for 2.4 with WLAN1, andGroup2 with WLAN1 and WLAN2.  Assign 2.4GHz to Group1 in the AP group, and 5GHz to Group2.