Lower DHCP lease time utilizing CLI for standalone AP mainly ZF 7363

[adam_tran_76457]

I been searching for days, but could not find any answer regarding a CLI for lowering the DHCP lease time for a standalone Ruckus 7363. If anyone could provide some Commands, Thanks in advance.

[chang_chang]

Hi Adam,
Please check up below command, it's been verified with 100.X version.

Usage: set dhcps {options}
         -> {enable|disable}
         -> iprange
         -> leasetime <90..86400> (in seconds)
         -> example: set dhcps leasetime 90 (please reboot AP to make this take effect!)

You could reduce leasetime 90sec but I do not recommend too much low lease time interval.

Thanks
Chang

[adam_tran_76457]

thank you so much.