cancel
Showing results for 
Search instead for 
Did you mean: 

Link between Throughput / MCS and SNR for APs?

jean_donan_olli
New Contributor


Hi, would some be able to point me in the direction of the right support documentation on Access Points which will give me information on the link between mod level (MCS level), SNR and expected throughputs for access points 7782 and T300?

Many thanks for your help.

jd

3 REPLIES 3

monnat_systems
Valued Contributor II
finding link between MCS and data rate is easy.. http://mcsindex.com/

but for link between mod level (MCS level), SNR and expected throughputs for access points like 7782 and T300 is always gonna be tough for the fact that it is outdoor AP and conditions in outdoors got too many variables and so are the results which may be not useable

jean_donan_olli
New Contributor
Thanks for your response.
I was hoping all manufacturers would share this data for an "ideal" unobstructed scenario on a data sheet or user guide.
Doing further digging I stumbled across this blog:
http://www.wlanpros.com/mcs-index-802-11n-802-11ac-chart-3/
It contains a useful table produced by @RevolutionWiFi which I assume is a summary of typical equipment performance.

monnat_systems
Valued Contributor II
i think you shud get in touch with your local ruckus sale rep. they may have or should be able to provide if it was captured somewhere. there is no harm in giving it a shot if time permits...