How to provision R510 to existing SZ

[goh_chee_wong]

Dear All Expert,

I would like to ask for provision new R510 to existing SZ. I need to change the AP IP address to the production network IP address then I only can SSH to the AP to provision the AP to the existing SZ via CLI "set scg ip“ correct me if I am wrong.

Thanks and Best Regards

Chee Wong

[philippe_decary]

Hi Chee Wong,

You are correct, but you need to type reboot once you have typed "set scg ip x.x.x.x"

where x.x.x.x is the SZ IP address.

Here is a YouTube video that will show you the process:

https://www.youtube.com/watch?v=DKd0o_bnpi4 

Here is an article about the discovery process and the registration to an SZ controller:

https://support.ruckuswireless.com/articles/000003403 

Regards,

[toomas_kadarpik]

Keep in mind that your smartzone has external NAT ip configured under cluster setup if the SZ is behind FW and also some firewalls need whitelisting for AP-s, they prevent SSH sessions.

[goh_chee_wong]

Dear Phil,

Thanks for answering my question. And also appreciate your help.

Thanks and Best Regards

Chee Wong